Getting used to using your keyboard exclusively and leaving your mouse behind will make you much more efficient at performing any task on any Windows system. I use the following keyboard shortcuts every day:

Windows key + R = Run menu

This is usually followed by:
cmd = Command Prompt
iexplore + "web address" = Internet Explorer
compmgmt.msc = Computer Management
dhcpmgmt.msc = DHCP Management
dnsmgmt.msc = DNS Management
services.msc = Services
eventvwr = Event Viewer
dsa.msc = Active Directory Users and Computers
dssite.msc = Active Directory Sites and Services
Windows key + E = Explorer

ALT + Tab = Switch between windows

ALT, Space, X = Maximize window

CTRL + Shift + Esc = Task Manager

Windows key + Break = System properties

Windows key + F = Search

Windows key + D = Hide/Display all windows

CTRL + C = copy

CTRL + X = cut

CTRL + V = paste

Also don't forget about the "Right-click" key next to the right Windows key on your keyboard. Using the arrows and that key can get just about anything done once you've opened up any program.


Keyboard Shortcuts

[Alt] and [Esc] Switch between running applications

[Alt] and letter Select menu item by underlined letter

[Ctrl] and [Esc] Open Program Menu

[Ctrl] and [F4] Close active document or group windows (does not work with some applications)

[Alt] and [F4] Quit active application or close current window

[Alt] and [-] Open Control menu for active document

Ctrl] Lft., Rt. arrow Move cursor forward or back one word

Ctrl] Up, Down arrow Move cursor forward or back one paragraph

[F1] Open Help for active application

Windows+M Minimize all open windows

Shift+Windows+M Undo minimize all open windows

Windows+F1 Open Windows Help

Windows+Tab Cycle through the Taskbar buttons

Windows+Break Open the System Properties dialog box



acessability shortcuts

Right SHIFT for eight seconds........ Switch FilterKeys on and off.

Left ALT +left SHIFT +PRINT SCREEN....... Switch High Contrast on and off.

Left ALT +left SHIFT +NUM LOCK....... Switch MouseKeys on and off.

SHIFT....... five times Switch StickyKeys on and off.

NUM LOCK...... for five seconds Switch ToggleKeys on and off.

explorer shortcuts

END....... Display the bottom of the active window.

HOME....... Display the top of the active window.

NUM LOCK+ASTERISK....... on numeric keypad (*) Display all subfolders under the selected folder.

NUM LOCK+PLUS SIGN....... on numeric keypad (+) Display the contents of the selected folder.

NUM LOCK+MINUS SIGN....... on numeric keypad (-) Collapse the selected folder.

LEFT ARROW...... Collapse current selection if it's expanded, or select parent folder.

RIGHT ARROW....... Display current selection if it's collapsed, or select first subfolder.




Type the following commands in your Run Box (Windows Key + R) or Start Run

devmgmt.msc = Device Manager
msinfo32 = System Information
cleanmgr = Disk Cleanup
ntbackup = Backup or Restore Wizard (Windows Backup Utility)
mmc = Microsoft Management Console
excel = Microsoft Excel (If Installed)
msaccess = Microsoft Access (If Installed)
powerpnt = Microsoft PowerPoint (If Installed)
winword = Microsoft Word (If Installed)
frontpg = Microsoft FrontPage (If Installed)
notepad = Notepad
wordpad = WordPad
calc = Calculator
msmsgs = Windows Messenger
mspaint = Microsoft Paint
wmplayer = Windows Media Player
rstrui = System Restore
netscp6 = Netscape 6.x
netscp = Netscape 7.x
netscape = Netscape 4.x
waol = America Online
control = Opens the Control Panel
control printers = Opens the Printers Dialog


internetbrowser

type in u're adress "google", then press [Right CTRL] and [Enter]
add www. and .com to word and go to it


For Windows XP:

Copy. CTRL+C
Cut. CTRL+X
Paste. CTRL+V
Undo. CTRL+Z
Delete. DELETE
Delete selected item permanently without placing the item in the Recycle Bin. SHIFT+DELETE
Copy selected item. CTRL while dragging an item
Create shortcut to selected item. CTRL+SHIFT while dragging an item
Rename selected item. F2
Move the insertion point to the beginning of the next word. CTRL+RIGHT ARROW
Move the insertion point to the beginning of the previous word. CTRL+LEFT ARROW
Move the insertion point to the beginning of the next paragraph. CTRL+DOWN ARROW
Move the insertion point to the beginning of the previous paragraph. CTRL+UP ARROW
Highlight a block of text. CTRL+SHIFT with any of the arrow keys
Select more than one item in a window or on the desktop, or select text within a document. SHIFT with any of the arrow keys
Select all. CTRL+A
Search for a file or folder. F3
View properties for the selected item. ALT+ENTER
Close the active item, or quit the active program. ALT+F4
Opens the shortcut menu for the active window. ALT+SPACEBAR
Close the active document in programs that allow you to have multiple documents open simultaneously. CTRL+F4
Switch between open items. ALT+TAB
Cycle through items in the order they were opened. ALT+ESC
Cycle through screen elements in a window or on the desktop. F6
Display the Address bar list in My Computer or Windows Explorer. F4
Display the shortcut menu for the selected item. SHIFT+F10
Display the System menu for the active window. ALT+SPACEBAR
Display the Start menu. CTRL+ESC
Display the corresponding menu. ALT+Underlined letter in a menu name
Carry out the corresponding command. Underlined letter in a command name on an open menu
Activate the menu bar in the active program. F10
Open the next menu to the right, or open a submenu. RIGHT ARROW
Open the next menu to the left, or close a submenu. LEFT ARROW
Refresh the active window. F5
View the folder one level up in My Computer or Windows Explorer. BACKSPACE
Cancel the current task. ESC
SHIFT when you insert a CD into the CD-ROM drive Prevent the CD from automatically playing.

Use these keyboard shortcuts for dialog boxes:

To Press
Move forward through tabs. CTRL+TAB
Move backward through tabs. CTRL+SHIFT+TAB
Move forward through options. TAB
Move backward through options. SHIFT+TAB
Carry out the corresponding command or select the corresponding option. ALT+Underlined letter
Carry out the command for the active option or button. ENTER
Select or clear the check box if the active option is a check box. SPACEBAR
Select a button if the active option is a group of option buttons. Arrow keys
Display Help. F1
Display the items in the active list. F4
Open a folder one level up if a folder is selected in the Save As or Open dialog box. BACKSPACE

If you have a Microsoft Natural Keyboard, or any other compatible keyboard that includes the Windows logo key and the Application key , you can use these keyboard shortcuts:


Display or hide the Start menu. WIN Key
Display the System Properties dialog box. WIN Key+BREAK
Show the desktop. WIN Key+D
Minimize all windows. WIN Key+M
Restores minimized windows. WIN Key+Shift+M
Open My Computer. WIN Key+E
Search for a file or folder. WIN Key+F
Search for computers. CTRL+WIN Key+F
Display Windows Help. WIN Key+F1
Lock your computer if you are connected to a network domain, or switch users if you are not connected to a network domain. WIN Key+ L
Open the Run dialog box. WIN Key+R
Open Utility Manager. WIN Key+U

accessibility keyboard shortcuts:

Switch FilterKeys on and off. Right SHIFT for eight seconds
Switch High Contrast on and off. Left ALT+left SHIFT+PRINT SCREEN
Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK
Switch StickyKeys on and off. SHIFT five times
Switch ToggleKeys on and off. NUM LOCK for five seconds
Open Utility Manager. WIN Key+U

shortcuts you can use with Windows Explorer:


Display the bottom of the active window. END
Display the top of the active window. HOME
Display all subfolders under the selected folder. NUM LOCK+ASTERISK on numeric keypad (*)
Display the contents of the selected folder. NUM LOCK+PLUS SIGN on numeric keypad (+)
Collapse the selected folder. NUM LOCK+MINUS SIGN on numeric keypad (-)
Collapse current selection if it's expanded, or select parent folder. LEFT ARROW
Display current selection if it's collapsed, or select first subfolder. RIGHT ARROW

This is well written explanation about bandwidth, very useful info.



BandWidth Explained

Most hosting companies offer a variety of bandwidth options in their plans. So exactly what is bandwidth as it relates to web hosting? Put simply, bandwidth is the amount of traffic that is allowed to occur between your web site and the rest of the internet. The amount of bandwidth a hosting company can provide is determined by their network connections, both internal to their data center and external to the public internet.


Network Connectivity

The internet, in the most simplest of terms, is a group of millions of computers connected by networks. These connections within the internet can be large or small depending upon the cabling and equipment that is used at a particular internet location. It is the size of each network connection that determines how much bandwidth is available. For example, if you use a DSL connection to connect to the internet, you have 1.54 Mega bits (Mb) of bandwidth. Bandwidth therefore is measured in bits (a single 0 or 1). Bits are grouped in bytes which form words, text, and other information that is transferred between your computer and the internet.

If you have a DSL connection to the internet, you have dedicated bandwidth between your computer and your internet provider. But your internet provider may have thousands of DSL connections to their location. All of these connection aggregate at your internet provider who then has their own dedicated connection to the internet (or multiple connections) which is much larger than your single connection. They must have enough bandwidth to serve your computing needs as well as all of their other customers. So while you have a 1.54Mb connection to your internet provider, your internet provider may have a 255Mb connection to the internet so it can accommodate your needs and up to 166 other users (255/1.54).


Traffic

A very simple analogy to use to understand bandwidth and traffic is to think of highways and cars. Bandwidth is the number of lanes on the highway and traffic is the number of cars on the highway. If you are the only car on a highway, you can travel very quickly. If you are stuck in the middle of rush hour, you may travel very slowly since all of the lanes are being used up.

Traffic is simply the number of bits that are transferred on network connections. It is easiest to understand traffic using examples. One Gigabyte is 2 to the 30th power (1,073,741,824) bytes. One gigabyte is equal to 1,024 megabytes. To put this in perspective, it takes one byte to store one character. Imagine 100 file cabinets in a building, each of these cabinets holds 1000 folders. Each folder has 100 papers. Each paper contains 100 characters - A GB is all the characters in the building. An MP3 song is about 4MB, the same song in wav format is about 40MB, a full length movie can be 800MB to 1000MB (1000MB = 1GB).

If you were to transfer this MP3 song from a web site to your computer, you would create 4MB of traffic between the web site you are downloading from and your computer. Depending upon the network connection between the web site and the internet, the transfer may occur very quickly, or it could take time if other people are also downloading files at the same time. If, for example, the web site you download from has a 10MB connection to the internet, and you are the only person accessing that web site to download your MP3, your 4MB file will be the only traffic on that web site. However, if three people are all downloading that same MP at the same time, 12MB (3 x 4MB) of traffic has been created. Because in this example, the host only has 10MB of bandwidth, someone will have to wait. The network equipment at the hosting company will cycle through each person downloading the file and transfer a small portion at a time so each person's file transfer can take place, but the transfer for everyone downloading the file will be slower. If 100 people all came to the site and downloaded the MP3 at the same time, the transfers would be extremely slow. If the host wanted to decrease the time it took to download files simultaneously, it could increase the bandwidth of their internet connection (at a cost due to upgrading equipment).


Hosting Bandwidth

In the example above, we discussed traffic in terms of downloading an MP3 file. However, each time you visit a web site, you are creating traffic, because in order to view that web page on your computer, the web page is first downloaded to your computer (between the web site and you) which is then displayed using your browser software (Internet Explorer, Netscape, etc.) . The page itself is simply a file that creates traffic just like the MP3 file in the example above (however, a web page is usually much smaller than a music file).

A web page may be very small or large depending upon the amount of text and the number and quality of images integrated within the web page. For example, the home page for CNN.com is about 200KB (200 Kilobytes = 200,000 bytes = 1,600,000 bits). This is typically large for a web page. In comparison, Yahoo's home page is about 70KB.


How Much Bandwidth Is Enough?

It depends (don't you hate that answer). But in truth, it does. Since bandwidth is a significant determinant of hosting plan prices, you should take time to determine just how much is right for you. Almost all hosting plans have bandwidth requirements measured in months, so you need to estimate the amount of bandwidth that will be required by your site on a monthly basis

If you do not intend to provide file download capability from your site, the formula for calculating bandwidth is fairly straightforward:

Average Daily Visitors x Average Page Views x Average Page Size x 31 x Fudge Factor

If you intend to allow people to download files from your site, your bandwidth calculation should be:

[(Average Daily Visitors x Average Page Views x Average Page Size) +
(Average Daily File Downloads x Average File Size)] x 31 x Fudge Factor

Let us examine each item in the formula:

Average Daily Visitors - The number of people you expect to visit your site, on average, each day. Depending upon how you market your site, this number could be from 1 to 1,000,000.

Average Page Views - On average, the number of web pages you expect a person to view. If you have 50 web pages in your web site, an average person may only view 5 of those pages each time they visit.

Average Page Size - The average size of your web pages, in Kilobytes (KB). If you have already designed your site, you can calculate this directly.

Average Daily File Downloads - The number of downloads you expect to occur on your site. This is a function of the numbers of visitors and how many times a visitor downloads a file, on average, each day.

Average File Size - Average file size of files that are downloadable from your site. Similar to your web pages, if you already know which files can be downloaded, you can calculate this directly.

Fudge Factor - A number greater than 1. Using 1.5 would be safe, which assumes that your estimate is off by 50%. However, if you were very unsure, you could use 2 or 3 to ensure that your bandwidth requirements are more than met.

Usually, hosting plans offer bandwidth in terms of Gigabytes (GB) per month. This is why our formula takes daily averages and multiplies them by 31.


Summary

Most personal or small business sites will not need more than 1GB of bandwidth per month. If you have a web site that is composed of static web pages and you expect little traffic to your site on a daily basis, go with a low bandwidth plan. If you go over the amount of bandwidth allocated in your plan, your hosting company could charge you over usage fees, so if you think the traffic to your site will be significant, you may want to go through the calculations above to estimate the amount of bandwidth required in a hosting plan.

Yes, firefox is already pretty damn fast but did you know that you can tweak it and improve the speed even more?

That's the beauty of this program being open source.
Here's what you do:
In the URL bar, type “about:config” and press enter. This will bring up the configuration “menu” where you can change the parameters of Firefox.

Note that these are what I’ve found to REALLY speed up my Firefox significantly - and these settings seem to be common among everybody else as well. But these settings are optimized for broadband connections - I mean with as much concurrent requests we’re going to open up with pipelining… lol… you’d better have a big connection.

Double Click on the following settins and put in the numbers below - for the true / false booleans - they’ll change when you double click.

Code:
browser.tabs.showSingleWindowModePrefs – true
network.http.max-connections – 48
network.http.max-connections-per-server – 16
network.http.max-persistent-connections-per-proxy – 8
network.http.max-persistent-connections-per-server – 4
network.http.pipelining – true
network.http.pipelining.maxrequests – 100
network.http.proxy.pipelining – true
network.http.request.timeout – 300


One more thing… Right-click somewhere on that screen and add a NEW -> Integer. Name it “nglayout.initialpaint.delay” and set its value to “0”. This value is the amount of time the browser waits before it acts on information it receives. Since you’re broadband - it shouldn’t have to wait.

Now you should notice you’re loading pages MUCH faster now!

Create One-Click Shutdown and Reboot Shortcuts:


First, create a shortcut on your desktop by right-clicking on the desktop, choosing New, and then choosing Shortcut. The Create Shortcut Wizard appears. In the box asking for the location of the shortcut, type shutdown. After you create the shortcut, double-clicking on it will shut down your PC.

But you can do much more with a shutdown shortcut than merely shut down your PC. You can add any combination of several switches to do extra duty, like this:

shutdown -r -t 01 -c "Rebooting your PC"
Double-clicking on that shortcut will reboot your PC after a one-second delay and display the message "Rebooting your PC." The shutdown command includes a variety of switches you can use to customize it. Table 1-3 lists all of them and describes their use.

I use this technique to create two shutdown shortcuts on my desktop—one for turning off my PC, and one for rebooting. Here are the ones I use:

shutdown -s -t 03 -c "Bye Bye m8!"
shutdown -r -t 03 -c "Ill be back m8 ;)!"

Switch
What it does

-s
Shuts down the PC.

-l
Logs off the current user.

-t nn
Indicates the duration of delay, in seconds, before performing the action.

-c "messagetext"
Displays a message in the System Shutdown window. A maximum of 127 characters can be used. The message must be enclosed in quotation marks.

-f
Forces any running applications to shut down.

-r
Reboots the PC.



Enjoy.....:-)

DirectX explained

Ever wondered just what that enigmatic name means?

Gaming and multimedia applications are some of the most satisfying programs you can get for your PC, but getting them to run properly isn’t always as easy as it could be. First, the PC architecture was never designed as a gaming platform. Second, the wide-ranging nature of the PC means that one person’s machine can be different from another. While games consoles all contain the same hardware, PCs don’t: the massive range of difference can make gaming a headache.


To alleviate as much of the pain as possible, Microsoft needed to introduce a common standard which all games and multimedia applications could follow – a common interface between the OS and whatever hardware is installed in the PC, if you like. This common interface is DirectX, something which can be the source of much confusion.

DirectX is an interface designed to make certain programming tasks much easier, for both the game developer and the rest of us who just want to sit down and play the latest blockbuster. Before we can explain what DirectX is and how it works though, we need a little history lesson.

DirectX history
Any game needs to perform certain tasks again and again. It needs to watch for your input from mouse, joystick or keyboard, and it needs to be able to display screen images and play sounds or music. That’s pretty much any game at the most simplistic level.

Imagine how incredibly complex this was for programmers developing on the early pre-Windows PC architecture, then. Each programmer needed to develop their own way of reading the keyboard or detecting whether a joystick was even attached, let alone being used to play the game. Specific routines were needed even to display the simplest of images on the screen or play a simple sound.

Essentially, the game programmers were talking directly to your PC’s hardware at a fundamental level. When Microsoft introduced Windows, it was imperative for the stability and success of the PC platform that things were made easier for both the developer and the player. After all, who would bother writing games for a machine when they had to reinvent the wheel every time they began work on a new game? Microsoft’s idea was simple: stop programmers talking directly to the hardware, and build a common toolkit which they could use instead. DirectX was born.

How it works
At the most basic level, DirectX is an interface between the hardware in your PC and Windows itself, part of the Windows API or Application Programming Interface. Let’s look at a practical example. When a game developer wants to play a sound file, it’s simply a case of using the correct library function. When the game runs, this calls the DirectX API, which in turn plays the sound file. The developer doesn’t need to know what type of sound card he’s dealing with, what it’s capable of, or how to talk to it. Microsoft has provided DirectX, and the sound card manufacturer has provided a DirectX-capable driver. He asks for the sound to be played, and it is – whichever machine it runs on.

From our point of view as gamers, DirectX also makes things incredibly easy – at least in theory. You install a new sound card in place of your old one, and it comes with a DirectX driver. Next time you play your favourite game you can still hear sounds and music, and you haven’t had to make any complex configuration changes.

Originally, DirectX began life as a simple toolkit: early hardware was limited and only the most basic graphical functions were required. As hardware and software has evolved in complexity, so has DirectX. It’s now much more than a graphical toolkit, and the term has come to encompass a massive selection of routines which deal with all sorts of hardware communication. For example, the DirectInput routines can deal with all sorts of input devices, from simple two-button mice to complex flight joysticks. Other parts include DirectSound for audio devices and DirectPlay provides a toolkit for online or multiplayer gaming.

DirectX versions
The current version of DirectX at time of writing is DirectX 9.0. This runs on all versions of Windows from Windows 98 up to and including Windows Server 2003 along with every revision in between. It doesn’t run on Windows 95 though: if you have a machine with Windows 95 installed, you’re stuck with the older and less capable 8.0a. Windows NT 4 also requires a specific version – in this case, it’s DirectX 3.0a.

With so many versions of DirectX available over the years, it becomes difficult to keep track of which version you need. In all but the most rare cases, all versions of DirectX are backwardly compatible – games which say they require DirectX 7 will happily run with more recent versions, but not with older copies. Many current titles explicitly state that they require DirectX 9, and won’t run without the latest version installed. This is because they make use of new features introduced with this version, although it has been known for lazy developers to specify the very latest version as a requirement when the game in question doesn’t use any of the new enhancements. Generally speaking though, if a title is version locked like this, you will need to upgrade before you can play. Improvements to the core DirectX code mean you may even see improvements in many titles when you upgrade to the latest build of DirectX. Downloading and installing DirectX need not be complex, either.

Upgrading DirectX
All available versions of Windows come with DirectX in one form or another as a core system component which cannot be removed, so you should always have at least a basic implementation of the system installed on your PC. However, many new games require the very latest version before they work properly, or even at all.

Generally, the best place to install the latest version of DirectX from is the dedicated section of the Microsoft Web site, which is found at www.microsoft.com/windows/directx. As we went to press, the most recent build available for general download was DirectX 9.0b. You can download either a simple installer which will in turn download the components your system requires as it installs, or download the complete distribution package in one go for later offline installation.

Another good source for DirectX is games themselves. If a game requires a specific version, it’ll be on the installation CD and may even be installed automatically by the game’s installer itself. You won’t find it on magazine cover discs though, thanks to Microsoft’s licensing terms.

Diagnosing problems

Diagnosing problems with a DirectX installation can be problematic, especially if you don’t know which one of the many components is causing your newly purchased game to fall over. Thankfully, Microsoft provides a useful utility called the DirectX Diagnostic Tool, although this isn’t made obvious. You won’t find this tool in the Start Menu with any version of Windows, and each tends to install it in a different place.

The easiest way to use it is to open the Start Menu’s Run dialog, type in dxdiag and then click OK. When the application first loads, it takes a few seconds to interrogate your DirectX installation and find any problems. First, the DirectX Files tab displays version information on each one of the files your installation uses. The Notes section at the bottom is worth checking, as missing or corrupted files will be flagged here.

The tabs marked Display, Sound, Music, Input and Network all relate to specific areas of DirectX, and all but the Input tab provide tools to test the correct functioning on your hardware. Finally, the More Help tab provides a useful way to start the DirectX Troubleshooter, Microsoft’s simple linear problem solving tool for many common DirectX issues.





ENjoy............;-)

How to Bypass BIOS Passwords

BIOS passwords can add an extra layer of security for desktop and laptop computers. They are used to either prevent a user from changing the BIOS settings or to prevent the PC from booting without a password. Unfortunately, BIOS passwords can also be a liability if a user forgets their password, or changes the password to intentionally lock out the corporate IT department. Sending the unit back to the manufacturer to have the BIOS reset can be expensive and is usually not covered in the warranty. Never fear, all is not lost. There are a few known backdoors and other tricks of the trade that can be used to bypass or reset the BIOS

DISCLAIMER
This article is intended for IT Professionals and systems administrators with experience servicing computer hardware. It is not intended for home users, hackers, or computer thieves attempting to crack the password on a stolen PC. Please do not attempt any of these procedures if you are unfamiliar with computer hardware, and please use this information responsibly. LabMice.net is not responsible for the use or misuse of this material, including loss of data, damage to hardware, or personal injury.


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot (or will not) help you, there are a number of methods that can be used to bypass or reset the BIOS password yourself. They include:

Using a manufacturers backdoor password to access the BIOS

Use password cracking software

Reset the CMOS using the jumpers or solder beads.

Removing the CMOS battery for at least 10 minutes

Overloading the keyboard buffer

Using a professional service

Please remember that most BIOS passwords do not protect the hard drive, so if you need to recover the data, simply remove the hard drive and install it in an identical system, or configure it as a slave drive in an existing system. The exception to this are laptops, especially IBM Thinkpads, which silently lock the hard drive if the supervisor password is enabled. If the supervisor password is reset without resetting the and hard drive as well, you will be unable to access the data on the drive.


--------------------------------------------------------------------------------

Backdoor passwords

Many BIOS manufacturers have provided backdoor passwords that can be used to access the BIOS setup in the event you have lost your password. These passwords are case sensitive, so you may wish to try a variety of combinations. Keep in mind that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards. Laptops typically have better BIOS security than desktop systems, and we are not aware of any backdoor passwords that will work with name brand laptops.

WARNING: Some BIOS configurations will lock you out of the system completely if you type in an incorrect password more than 3 times. Read your manufacturers documentation for the BIOS setting before you begin typing in passwords

Award BIOS backdoor passwords:

ALFAROME ALLy aLLy aLLY ALLY aPAf _award AWARD_SW AWARD?SW AWARD SW AWARD PW AWKWARD awkward BIOSTAR CONCAT CONDO Condo d8on djonet HLT J64 J256 J262 j332 j322 KDD Lkwpeter LKWPETER PINT pint SER SKY_FOX SYXZ syxz shift + syxz TTPTHA ZAAADA ZBAAACA ZJAAADC 01322222
589589 589721 595595 598598

AMI BIOS backdoor passwords:

AMI AAAMMMIII BIOS PASSWORD HEWITT RAND AMI?SW AMI_SW LKWPETER A.M.I. CONDO

PHOENIX BIOS backdoor passwords:

phoenix, PHOENIX, CMOS, BIOS

MISC. COMMON PASSWORDS

ALFAROME BIOSTAR biostar biosstar CMOS cmos LKWPETER lkwpeter setup SETUP Syxz Wodj

OTHER BIOS PASSWORDS BY MANUFACTURER

Manufacturer Password
VOBIS & IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE
Epox central
Freetech Posterie
IWill iwill
Jetway spooml
Packard Bell bell9
QDI QDI
Siemens SKY_FOX
TMC BIGO
Toshiba Toshiba

TOSHIBA BIOS

Most Toshiba laptops and some desktop systems will bypass the BIOS password if the left shift key is held down during boot

IBM APTIVA BIOS

Press both mouse buttons repeatedly during the boot


--------------------------------------------------------------------------------

Password cracking software

The following software can be used to either crack or reset the BIOS on many chipsets. If your PC is locked with a BIOS administrator password that will not allow access to the floppy drive, these utilities may not work. Also, since these utilities do not come from the manufacturer, use them cautiously and at your own risk.

Cmos password recovery tools 3.1
!BIOS (get the how-to article)
RemPass
KILLCMOS

--------------------------------------------------------------------------------

Using the Motherboard "Clear CMOS" Jumper or Dipswitch settings

Many motherboards feature a set of jumpers or dipswitches that will clear the CMOS and wipe all of the custom settings including BIOS passwords. The locations of these jumpers / dipswitches will vary depending on the motherboard manufacturer and ideally you should always refer to the motherboard or computer manufacturers documentation. If the documentation is unavailable, the jumpers/dipswitches can sometimes be found along the edge of the motherboard, next to the CMOS battery, or near the processor. Some manufacturers may label the jumper / dipswitch CLEAR - CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD. On laptop computers, the dipswitches are usually found under the keyboard or within a compartment at the bottom of the laptop.
Please remember to unplug your PC and use a grounding strip before reaching into your PC and touching the motherboard. Once you locate and rest the jumper switches, turn the computer on and check if the password has been cleared. If it has, turn the computer off and return the jumpers or dipswitches to its original position.


--------------------------------------------------------------------------------

Removing the CMOS Battery

The CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the CMOS may reset itself and the password should be blank. (Along with any other machine specific settings, so be sure you are familiar with manually reconfiguring the BIOS settings before you do this.) Some manufacturers backup the power to the CMOS chipset by using a capacitor, so if your first attempt fails, leave the battery out (with the system unplugged) for at least 24 hours. Some batteries are actually soldered onto the motherboard making this task more difficult. Unsoldering the battery incorrectly may damage your motherboard and other components, so please don't attempt this if you are inexperienced. Another option may be to remove the CMOS chip from the motherboard for a period of time.
Note: Removing the battery to reset the CMOS will not work for all PC's, and almost all of the newer laptops store their BIOS passwords in a manner which does not require continuous power, so removing the CMOS battery may not work at all. IBM Thinkpad laptops lock the hard drive as well as the BIOS when the supervisor password is set. If you reset the BIOS password, but cannot reset the hard drive password, you may not be able to access the drive and it will remain locked, even if you place it in a new laptop. IBM Thinkpads have special jumper switches on the motherboard, and these should be used to reset the system.


--------------------------------------------------------------------------------

Overloading the KeyBoard Buffer

On some older computer systems, you can force the CMOS to enter its setup screen on boot by overloading the keyboard buffer. This can be done by booting with the keyboard or mouse unattached to the systems, or on some systems by hitting the ESC key over 100 times in rapid succession.


--------------------------------------------------------------------------------

Jumping the Solder Beads on the CMOS

It is also possible to reset the CMOS by connecting or "jumping" specific solder beads on the chipset. There are too many chipsets to do a breakdown of which points to jump on individual chipsets, and the location of these solder beads can vary by manufacturer, so please check your computer and motherboard documentation for details. This technique is not recommended for the inexperienced and should be only be used as a "last ditch" effort.


--------------------------------------------------------------------------------

Using a professional service

If the manufacturer of the laptop or desktop PC can't or won't reset the BIOS password, you still have the option of using a professional service. Password Crackers, Inc., offers a variety of services for desktop and laptop computers for between $100 and $400. For most of these services, you'll need to provide some type of legitimate proof of ownership. This may be difficult if you've acquired the computer second hand or from an online auction.

Get unlimited bandwidth from your host for free


NOTE: This applies only to specific hosting companies, due to the
specific setup needed and does have its drawbacks.

While setting up hosting space with a specific company I often deal
with, I noticed that they used a shared IP. (IP shared by two or more
websites/domains.) Well, the rates for unlimited bandwidth were
around $50+ per month, which I found unreasonable. I didnt require
much space, and didnt want to be limited to a mere 3 gig of traffic
per month.

Back on track... When setting up the acct, the hosting company needs
to know the domain name so that they can direct it accordingly.
(example: 'http://www.123.4.567.890/~user1/ ,
'http://www.123.4.567.890/~user2/ etc)

At this point you can give a url that doesnt belong to you at all. As
long as the nameservers dont change, that should have absolutly no
negative effects on you or your site whatsoever.

How it works is this:
The host propogates you a certain amount space on its servers, and
monitors the traffic that enters their space through the domain its
registered under. Being that the domain isn't connected to the site
at all, it registers ZERO traffic.

Zero traffic registered = can't possibly go over bandwidth
restrictions
can't possibly go over bandwidth restrictions = free unlimited
bandwidth

Now the problems with this (besides the ethical ones) is that your
host may offer X amount of mail addys with the acct
(you@y...) and these will not work, as the name isnt on their
DNS. However, some domain companies allow you to set it up
regardless. Another problem seems to be strictly cosmetic, but can be
highly problematic... Once you attach the domain you want onto the
site, each page comes up/w the ip/UN the host propagated to your
acct. Its at this point where you have to have a phenominal 10-15
character alphanumerical or better (#, &, etc) pw, or your site will
be vulnerable to attack since the attacker already has your UN. This
only gives attackers a slight advantage as the amount of time it
would take to brute force a 10 character pw @ a rate of 1,000,000 per
second is 10 years. Add numbers and case sensitivity to that and it
becomes approx 26,980 years.

While I'm on it, I may as well add that if you use this method,
obviously you are going to be using the lowest cost hosting plan
available, which in turn will offer the least amount of space. Thats
why free hosts were invented.

Free hosts suck as a general rule. Who wants a site smothered in ads?
However, if you upload all your programs, graphics and other large
files (have a backup of course) to a reliable free host and target
them accordingly from your site you have just freed up a signifigant
amount of space. The only setback/w this is having to keep an index
card or file around/w your pws, as you should never use the same one
twice, and want to use complicated ones.

okay lets keep this tutorial short. you want movies and games/mp3 / games and dont' know where to get them, thank god there is google.com
goto www.google.com

put this string in

"parent directory " /appz/ -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

"parent directory " DVDRip -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

"parent directory "Xvid -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

"parent directory " Gamez -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

"parent directory " Name of Singer or album -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

notice that iam only changing the word after the parent directory, change it to what you want and you will get lots of goods. i got plenty of movie sites heh.

How To Make An Animted Logo, the easy way


Things you will need:
QUOTE
1. Photoshop or Paintshop (any versions)
2. Xara3D 5.xx
3. Jasc animation shop 3.xx
4. DUH!! A pic you want as a logo LOL

Things you MIGHT need:
1. a computer
2. Internet connection
3. consciousness
4. corn on the cob

Here they are for your convinience:
Adobe Photoshop CS v8.0 thanx to TheCollector
http://www.shareordie.com/index.php?showto...85&hl=Photoshop

Jasc Paint Shop Pro 9.0 Retail thanx to arclite
http://www.shareordie.com/index.php?showto...&hl=Jasc&st=100

Xara3D 5.02 thanx to Zabref
http://www.shareordie.com/index.php?showtopic=6512&hl=XARA

Jasc Animation Shop 3.11 thanx to sev7en
http://www.shareordie.com/index.php?showtopic=34928&hl=


Steps:
1. Using your photo editor fix/touch up you pic/logo to your liking….too easy(example bellow)
user posted image

2. Save it some where easy to find, for example “C:\pictures” or “C:\Windows\thecenterofhell\system\system32\system64\system128\???” although I don’t recommend the second one.

3.Open Xara3D 5.xx, press “Alt+T” or click on the “T” button on the LEFT PANEL erase all of the text in the window that pops up then press ok.
user posted image
user posted image

4. Press “Alt+U” or click on the yellow “U” surrounded in gray on the LEFT PANEL, check the “button” box and select a desire button type and leave this option window open you will need it again.
user posted image

5. Press the “At+X” or click the black “X” on the LEFT PANEL, click “load texture” in the pop up window, find the picture you made/adjusted and highlight it then click open or just double-click it. Use the “size, x, y, angle” sliders to adjust the picture or “texture” and in the “button options” windows use the “stretch, corners”(corners, only if using this option you can adjust) to adjust the button size.
user posted image

6. Press “Alt+A” or click the black “A” on the LEFT PANEL with what looks like to me is a half-halo with an arrow tip!? Anyway, here is a quick rundown on what the options here do: (BY THE WAY TO ACTIVATE OR “PREVIEW ANIMATION” PRESS “Ctrl+spacebar”).
user posted image


A. Frames per cycle: This is the number of frames for each complete cycle through the animation sequence. The greater the number of frames the smoother the animation. The drawback is that the file is bigger - this is a big disadvantage for web graphics. You may need to try different values to get the best results.
B. Frames per second: The animation speed. Slow speeds can give jerky movement. High speeds can also give jerky movement as the program displaying the animation may not be able to keep up. Again you may need to try different values.
C. Pause: This pauses the first frame before continuing the rest of the animation. Type in a value in centiseconds (1/100ths of a second) - a 2 second pause is 200 cs. Note that this applies only to the first frame; use Frames per cycle and Frames per second to control the overall speed of the animation.
D. Loop Value: Unchecked is Infinite, Any other value see for yourself. Lmao
E. Loop: This lets you specify how many times the animation should repeat itself. Note that some browsers take any value other than 1 to mean 'loop forever'. Therefore, your animation either plays once or forever.
F. Style: This controls the type of animation:
Rotate 1 rotates all the text as one; Rotate 2 rotates each character. (Buttons have a single Rotate option.) Rotate text/Rotate lights - select whether you want the text to rotate or the lights or both. You cannot rotate the shadow as this would create very large files. Direction - selects the direction of rotation.

Swing options: Swing 1 swings all the text as one; Swing 2 swings each character. (Buttons have a single Swing option.) Angle - how much you want the heading to swing.

Pulsate options: Pulsate 1 pulsates all the text as one; Pulsate 2 pulsates each character. (Buttons have a single Pulsate option.) Minimum text size - how far back to pulsate the text. Shrink+Grow & Grow+Shrink - only have an effect if you Pause the animation. These options select the starting point for the animation (maximum or minimum.)

Fade options: Fade in - the heading emerges from the background color. Fade out - the heading merges into the background color. SO AFTER PICKING ONE………………..


7. On the top left go to FILE>>>EXPORT ANIMATION or press “Ctrl+Shift+X” and save in desired location.
user posted image

8. When the next window pops up (Export as animated gif save location then options): Experiment with each one to get it right, but remember the SoD rules about Siggys and Avatars.
user posted image
user posted image


Because Animated GIFs can be quite large, you may find that a 16 or 32 color, optimized palette per frame, produces the best results for the smallest file size. However you might need to experiment.
Dithering always makes GIFs look better, but also makes them larger. When outputting at 256 colors you may find that there is no need to turn dithering on.
Current Window Size lets you export just the area surrounding the text (Crop on) or the entire window area (Crop off.)
User Defined lets you specify the dimensions of the bitmap.

I. What is Linux?
II. Trying it out
III. Installing
IV. What to do now
V. The Console

Intro:
This tutorial is written with the total Linux n00b in mind.
I've seen too many n00bs get totally left in the dark by asking what
the best distro is. They seem to only get flooded with too many
answers in so short a time. I'm a little bit of a n00b too, so I know
how it feels. I will cover a grand total of two basic distros. You may
learn to strongly prefer other ones (I do!) but this is just to get
you started. I touch on a number of topics that would be impossible to
go into in depth in one tutorial, so I encourage you to actively seek
out more about the concepts I make reference to.


I. What is Linux?

Linux is basically an operating system (OS for short). The Windows
machine you're (probably) using now uses the Mcft Windows
operating system.

Ok, so what's so different about Linux?

Linux is part of a revolutionary movement called the open-source
movement. The history and intricacies of that movement are well beyond
the scope of this tutorial, but I'll try and explain it simply. Open
source means that the developers release the source code for all their
customers to view and alter to fit what they need the software to do,
what they want the software to do, and what they feel software should
do. Linux is a programmer?s dream come true, it has the best compilers,
libraries, and tools in addition to its being open-source. A
programmer's only limit then, is his knowledge, skill, time, and
resolve.

What is a distro?

A distro is short for a distribution. It's someone's personal
modification or recreation of Linux.

What do you mean by distros? I just want Linux!

Since Linux is open source, every developer can write his own version.
Most of those developers release their modifications, or entire
creations as free and open source. A few don't and try to profit from
their product, which is a topic of moral debate in the Linux world.
The actual Linux is just a kernel that serves as a node of
communication between various points of the system (such as the CPU,
the mouse, the hard drive etc.). In order to use this kernel, we must
find a way to communicate with it. The way we communicate is with a
shell. Shells will let us enter commands in ways that make sense to
us, and send those commands to the kernel in ways that makes sense to
it. The shell most Linux's use it the BASH shell (Bourne Again SHell).
The kernel by itself will not do, and just a shell on top of the kernel
won?t either for most users; we are then forced to use a distribution.

What distro is best?

This is not the question you want to ask a large number of people at
one time. This is very much like asking what kind of shoe is best,
you'll get answers anywhere from running shoes, hiking boots, cleats,
to wingtips. You need to be specific about what you plan on using
Linux for, what system you want to use it on, and many other things. I
will cover two that are quick and easy to get running. They may not be
the best, or the quickest, or the easiest, or the most powerful, but
this is a guide for getting started, and everyone has to start
somewhere.

How much does it cost?

computer + electricity + internet + CD burner and CDs = Linux
I'll let you do your own math.
Note however that a few do charge for their distros, but they aren't
all that common, and can be worked around. Also, if you lack internet
access or a CD burner or CDs or you just want to, you can normally
order CDs of the distro for a few dollars apiece.



II. Trying it out.

Wouldn't it stink if you decide to wipe out your hard drive and install
Linux as the sole operating system only to learn that you don't know
how to do anything and hate it? Wouldn?t it be better to take a test
drive? 95 out of a 100 of you know where I'm heading with this section
and can therefore skip it. For those of you who don't know, read on.

There are many distros, and most distros try to have something that
makes them stand out. Knoppix was the first live-CD distro. Although
most of the other main distros have formed their own live-CDs, Knoppix
is still the most famous and I will be covering how to acquire it.

A live-CD distro is a distribution of Linux in which the entire OS can
be run off of the CD-ROM and your RAM. This means that no installation
is required and the distro will not touch your hard disk or current OS
(unless you tell it to). On bootup, the CD will automatically detect
your hardware and launch you into Linux. To get back to Windows, just
reboot and take the CD out.

Go to the Knoppix website (www.knoppix.com). Look around some to get
more of an idea on what Knoppix is. When you're ready, click Download.
You'll be presented with a large amount of mirrors, some of which have
ftp and some of which have http also.

note: the speed of the mirrors vary greatly, and you may want to
change mirrors should your download be significantly slow.

Choose a mirror. Read the agreement and choose accept. You'll probably
want to download the newest version and in your native language (I'll
assume English in this tutorial). So choose the newest file ending in
-EN.iso

note: you might want to also verify the md5 checksums after the
download, if you don't understand this, don't worry too much. You just
might have to download it again should the file get corrupted (you'll
have to anyway with the md5). Also, a lot of times a burn can be
botched for who-knows what reason. If the disk doesn?t work at all,
try a reburn.

Once the .iso file is done downloading, fire up your favorite
CD-burning software. Find the option to burn a CD image (for Nero, this
is under copy and backup) and burn it to a disk. Make sure you don't
just copy the .iso, you have to burn the image, which will unpack all
the files onto the CD.

Once the disk is done, put it in the CD-ROM drive and reboot the
computer. While your computer is booting, enter CMOS (how to get to
CMOS varies for each computer, some get to it by F1 or F2 or F3, etc.)
Go to the bootup configuration and place CD-ROM above hard disk. Save
changes and exit. Now, Knoppix will automatically start. You will be
presented with a boot prompt. Here you can input specific boot
parameters (called cheatcodes), or just wait and let it boot up using
the default.

note: Sometimes USB keyboards do not work until the OS has somewhat
booted up. Once you?re actually in Knoppix, your USB keyboard should
work, but you may not be able to use cheatcodes. If you need to,
attach a PS/2 keyboard temporarily. Also, if a particular aspect of
hardware detection does not work, look for a cheatcode to disable it.
Cheatcodes can be found on the Knoppix website in text format (or in
HTML at www.knoppix.net/docs/index.php/CheatCodes).

Upon entering the KDE desktop environment, spend some time exploring
around. Surf the web, get on IM, play some games, explore the
filesystem, and whatever else seems interesting. When your done, open
up the console (also called terminal, xterm, konsole, or even shell)
and get ready for the real Linux. See section V for what to do from
here.

note: to function as root (or the superuser) type su.


It's not entirely necessary that you are a console wizard at this point
(although you will need to be sooner or later), but a little messing
around wont hurt.

Just as there are many Linux distros, so there are also many types of
Knoppix. I won?t go into using any of them, but they should all be
somewhat similar. Some of them include: Gnoppix, Knoppix STD, Morphix,
and PHLAK. Other distros also have live-CDs.

III. Installing

I will guide you through the installation of Fedora Core 2. The reason
I chose Fedora is because it contains the Anaconda installer, which is
a very easy installer.

Download the discs from here:
http://download.fedora.redhat.com/pub/fedo...ore/2/i386/iso/
If the link doesn?t work, then go to www.redhat.com and navigate your
way to downloading Fedora (odds are your architecture is i386).
You will want to download the FC2-i386-disc1.iso and burn it using the
method for Knoppix. Do the same for all the discs.

Note: do NOT download the FC2-i386-SRPMS-disc1.iso files.

Now, once you?re ready, insert disc 1 into the drive and reboot.

The installer should come up automatically (if not, then see the
Knoppix section on CMOS).

Note: installer may vary depending on version. Follow directions best
you can using your best judgement.

1. Language: choose English and hit enter
2. Keyboard: choose us (probably) and hit enter
3. Installation media: choose local CDROM (probably) and hit enter
4. CD test: you can choose to test or skip
5. Intro: click next
6. Monitor: choose your monitor to the best of your ability, if you?re unsure, choose on of the generic ones
7. Installation type: choose which ever you want (default should be fine)
8. Partition: choose to automatically partition (unless you know what you?re doing)
9. Partition: the default partitions should suffice
10. Boot loader: choose your boot loader (grub for default)
11. Network settings: choose the correct settings for your network (generally, don?t mess with anything unless you know what you?re doing)
12. Firewall: you can choose a firewall if you want to
13. Language support: choose any additional language support you want
14. Time zone: pick your time zone
15. Root password: set your root password (root is the admin, or superuser; you want it to be very secure)
16. Packages: choose which packages you want to install. For hard drives over 10 gigs, you can go ahead and choose all
packages (depending on how much disk space you plan on taking up later, note that most everything you?ll need is a package: the exception
being large media files). You will generally want to install all the packages you think you?ll ever need. Two desktop environments aren?t necessary.
Make sure you have at least one and the X window system! (if you want a GUI that is). I suggest you get all the servers too.

Note: Knoppix uses the KDE Desktop environment

17. Make sure everything is all right, and install
18. You can create a boot disk if you want

Note: Desktop environments might have a set-up once you enter them

IV What to do now

Now that you have a Linux set-up and running, there are many paths you
can head down. First, you should explore your GUI and menus. Browse
the web with Mozilla, get on IM with GAIM, play games, add/delete
users, check out OpenOffice, and anything else that might be part of
your daily use. Also, set up a few servers on your computer to play
around with, specifically SMTP (*wink*wink*), FTP (vsftp is a good
one), and either telnet or SSH (OpenSSH is a good one). The setup and
use of these are beyond the scope of this tutorial, but researching
them could prove to be very educational.

The filesystem
The Linux (and Unix) filesystem is different from the normal Windows
that you?re used to. In Windows, your hard drive is denoted ?C:\? (or
whatever). In Linux, it is called the root directory and is denoted
?/?. In the / directory, there are several default folders, including
dev (device drivers) mnt (mount) bin (binaries) usr (Unix System
Resources) home, etc, and others. I encourage you to explore around
the whole file system (see section V) and research more.

Once you are well situated, it?s time to get into the heart and power
of Linux: the console. The next session will guide you through it and
set you on the path to finding out how to do stuff for yourself. You
will (probably) want to start learning to rely less and less on the
GUI and figure out how to do everything through the console (try
launching all your programs from the console, for example).

V. The Console

The Console might look familiar to DOS if you?ve ever used it. The
prompt should look something like the following:

AvatharTri@localhost avathartri$

With the blinking _ following it. This can vary greatly as it is fully
customizable. Let?s get started with the commands.

First, let?s explore the file system. The command ls will "list" the
files in the current directory. Here?s an example:

AvatharTri@localhost avathartri$ ls

It should then display the contents of the current directory if there
are any. Almost all commands have options attached to them. For
example, using the -l option, which is short for "long" will display
more information about the files listed.

AvatharTri@localhost avathartri$ ls -l

We will get into how to find out the options for commands and what
they do later.

The second command to learn will be the cd command, or "change
directory". To use it, you type cd followed by a space and the
directory name you wish to go into. In Linux, the top directory is /
(as opposed to C:\ in Windows). Let?s get there by using this command:

AvatharTri@localhost avathartri$ cd /
AvatharTri@localhost /$

Now, we are in the top directory. Use the ls command you learned
earlier to see everything that?s here. You should see several items,
which are directories. Now, let?s go into the home directory:

AvatharTri@localhost /$ cd home
AvatharTri@localhost home$

And you can now ls and see what?s around. In Linux there are some
special symbol shortcuts for specific folders. You can use these
symbols with cd, ls, or several other commands. The symbol ~ stands
for your home folder. One period . represents the directory your
currently in. Two periods .. represent the directory immediately above
your own. Here?s an example of the commands:

AvatharTri@localhost home$ cd ~
AvatharTri@localhost avathartri$

This moved us to our user?s personal directory.

AvatharTri@localhost avathartri$ cd .
AvatharTri@localhost avathartri$ cd ..
AvatharTri@localhost home$

The cd .. moved us up to the home directory.
As you?ve probably noticed by now, the section behind the prompt
changes as you change folders, although it might not always be the
case as it?s up to the personal configuration.

You can use these symbols with the ls command also to view what is in
different folders:

AvatharTri@localhost home$ ls ~
AvatharTri@localhost home$ ls ..

And you can view what is in a folder by specifying its path:

AvatharTri@localhost home$ ls /
AvatharTri@localhost home$ ls /home

The last command we will cover as far as finding your way around the
filesystem is the cat command. The cat command will show the contents
of a file. Find a file by using the cd and ls commands and then view
its contents with the cat command.

AvatharTri@localhost home$ cd [directory]
AvatharTri@localhost [directory]$ ls
AvatharTri@localhost [directory]$ cat [filename]

Where [directory] is the directory you want to view and [filename] is
the name of the file you want to view. Omit the brackets. Now, if the
file you viewed was a text file, you should see text, but if it wasn?t,
you might just see jumbled garbage, but this is ok. If the file goes
by too fast and goes off the screen, don?t worry, we will get to how
to scroll through it later.

One of the most useful commands is the man command, which displays the
"manual" for the command you want to know more about. To learn more
about the ls command:

AvatharTri@localhost home$ man ls

And you will see the manual page for ls. It displays the syntax, a
description, options, and other useful tidbits of information. Use the
up and down arrows to scroll and press q to exit. You can view the
manual pages for any command that has one (most commands do). Try this
out with all the commands that you know so far:

AvatharTri@localhost home$ man cd
AvatharTri@localhost home$ man cat
AvatharTri@localhost home$ man man

One very crucial option to the man command is the -k option. This will
search the descriptions of manual pages for the word you specify. You
can use this to find out what command to do what you need to do. For
example, let?s say we want to use a text editor:

AvatharTri@localhost home$ man -k editor

And you should see a list of apps with a short description and the
word "editor" in the description.

With a blank prompt, you can hit tab twice for Linux to display all
the possible commands. For Linux to display all the commands beginning
with a certain letter or series of letters, type those letters and hit
tab twice.

Note: This is actually a function of BASH and not Linux, but BASH is
the default Linux shell.

Now that you know a little about moving around the filesystem and
viewing manual pages, there is one more trick that we will cover to
help you out. Remember how the man pages were scrollable as in you
could use the arrow keys to scroll up and down? That is because the
man pages use something called the less pager. We?re not going to go
into what this does exactly and how it works, but that?s definitely
something that you will want to look up. Here?s how to use the less
pager with a file:

AvatharTri@localhost home$ cat [filename] | less

That uses something called a pipe. The line is the vertical line above
enter on your keyboard. Briefly, what this does is take the output
from the cat command, and stick it in the less pager. By doing this,
you can view files that would normally run off the screen and scroll
up and down.

Some final commands to check out:

mkdir - make directories
cp - copy file
mv - move file
rm - remove file
rmdir - remove directory
grep - search a file for a keyword
pwd - display current working directory
top - display system resources usage (kill the program with control + c)

How To Block Websties Without Software, block websites

Steps:

1] Browse C:\WINDOWS\system32\drivers\etc
2] Find the file named "HOSTS"
3] Open it in notepad
4] Under "127.0.0.1 localhost" Add 127.0.0.2 www.sitenameyouwantblocked.com , and that site will no longer be accessable.
5] Done!

-So-

127.0.0.1 localhost
127.0.0.2 www.blockedsite.com

-->www.blockedsite.com is now unaccessable<--


For every site after that you want to add, just add "1" to the last number in the internal ip (127.0.0.2) and then the addy like before.

IE: 127.0.0.3 www.blablabla.com
127.0.0.4 www.blablabla.com
127.0.0.5 www.blablabla.com

etc

This summary is not available. Please click here to view the post.

This service is being provided as a convenience to users who need to be able to produce a small DOS program and do not have access to a DOS machine with a compiler on it. There is no guarantee that this service will be available in the future, and I reserve the right to disable it when I need the CPU cycles myself.

There is currently a limit of 1000 source bytes and 200,000 executable bytes. Only C programs are allowed. The math library will be linked in. Symbol information will be stripped. If compilation is successful, all you will get is the binary (exe format), else you will see the results of your compilation.
Code:

http://www.delorie.com/djgpp/compile/

Feel free to add more to this list...

milw0rm:
http://www.milw0rm.com/rss.php

metasploit:
http://www.metasploit.com/projects/F...dates/rss.html - metasploit

Securityfocus:
http://www.securityfocus.com/rss/vulnerabilities.xml
http://www.securityfocus.com/rss/news.xml

Whitedust:
http://www.whitedust.net/articles.rss

Packetstorm:
http://packetstormsecurity.org/advisories.xml
http://packetstormsecurity.org/exploits.xml
http://packetstormsecurity.org/headlines.xml


http://www.irongeek.com/irongeek.rss
http://www.security.nnov.ru/informer/rss.asp?l=EN
http://www.web-hack.ru/rss/news.php (russian)
http://www.cgisecurity.com/index.rss
http://www.hackerscenter.com/rss/xml/exploits.asp
http://www.hackerscenter.com/rss/xml/downloads.asp
http://www.hackerscenter.com/rss/xml/library.asp
http://seclists.org/rss/nmap-hackers.rss
http://seclists.org/rss/bugtraq.rss
http://seclists.org/rss/webappsec.rss
http://seclists.org/rss/vulnwatch.rss
http://backend.secwatch.org/be-exploits.rss
http://securitydot.net/rss/exploits.xml.

Movie & TV Torrents
Registration Is Required For Some Sites

www.dhingana.com
www.dishant.com
www.dhoomley.com
www.raaga.com
http://freehindilyrics.com/

http://www.idesitv.com/

http://www.softpedia.com/

http://www.wordreference.com

Huge Hindimp3 Collection With Fast Download